This dataset consists of one data file from 3 year water quality monitoring program conducted across the Russell-Mulgrave
catchment (south of Cairns). Data is the result of discrete ‘grab’ samples analysed at TropWATER JCU laboratory for nutrients
and sediments. Samples were collected throughout the year at nine sites that capture a range of different landuse types across
the catchment including sugarcane, bananas, natural rainforest and urban influences.
*This data is under an embargo period until the end of the extension project
The aim of this study dataset was to characterise the water quality impacts and relative signatures of a range of distinct
landuse types found across the Russell-Mulgrave catchment, and quantify the sugarcane industry’s specific role in end-of-catchment
water quality. Subcatchment waterway sites were selected to represent the major land uses of the region, and were classed
as sugarcane, urban, banana, or natural rainforest land use categories. Sites were also selected based on wet season accessibility
to the site and the size of the waterway. A total of 9 sites were selected for the monitoring program through the period
Monitoring focused primarily on nutrient (nitrogen and phosphorus) and sediment water quality parameters, as these are
typically identified as the most important management challenges for north Queensland industries, and considered most relevant
to Great Barrier Reef water quality issues.
Sampling at all sites was conducted on a monthly or bimonthly basis during dry-season low flows. Sampling frequency increased
to daily (and occasionally several samples a day) during wet season flood events, particularly during early wet season
‘first-flush’ events to capture initial high concentration run-off dynamics from the immediate catchment area. Wet season
sample frequency was extended to approximate weekly collection during larger, more sustained events during later stages
of the wet season.
Samples were manually collected by project scientists, or support staff trained individually in the correct sampling and
quality assurance procedures developed in conjunction with the TropWATER Water Quality Laboratory. Water samples were collected
in pre-rinsed 1-L polypropylene bottles using an extendable sampling pole for total suspended solids (suspended sediments),
unfiltered nutrient samples were subsampled into 60-mL polypropylene vials (Sarstedt, Germany), with filterable nutrients
filtered on-site through pre-rinsed filter modules (MiniSart 0.45 ?m cellulose acetate, Sartorius, Germany) into six 10-mL
polypropylene vials (Sarstedt, Australia). Samples were stored on ice in eskies following sampling and on-site processing,
for transport to the laboratory for subsequent analysis.
Site water samples were analysed for total nitrogen (TN), ammonium nitrogen (AN), oxidised nitrogen (ON: nitrate + nitrite),
filterable reactive phosphorus (FRP) and total suspended solids (TSS). Samples for TN were digested in an autoclave using
an alkaline persulfate technique (modified from Hosomi and Sudo, 1987) and the resulting solution simultaneously analysed
for ON by segmented flow auto-analysis using an OI Analytical (Texas, USA) Flow Solution IV. The analyses of ON, AN
and FRP were also conducted using segmented flow auto-analysis techniques following standard methods (APHA, 2005).
A specific urea assay was also conducted to quantify the urea component of DON using a segmented flow analyser modification
of the procedures developed by Marsh et al. (1965). Samples for TSS analyses were filtered through pre-weighed Whatman (England)
GF/C filter membranes (nominally 1.2 mm pore size) and oven-dried at 103–105 °C for 24 h and reweighed to determine the
dry TSS weight as described in APHA (2005).
Data consists of an excel spreadsheet with all samples collected at each of the nine sites listed sequentially (by date of
collection) on separate, named spreadsheet tabs. Additional information related to unique laboratory sample and job-batch
numbers is also listed for QA/QC purposes. Duplicate samples were also collected on occasion at some sites for analytical
QA/QC purposes. These samples are identified in a separate column. Grey cell fill indicated a particular parameter was not
assessed for that sample.
APHA., 2005. Standard Methods for the Examination of Water and Wastewaters. American Public Health Association, American
Waterworks Association and Water Environment Federation: Washington, USA.
Hosomi, M., Sudo, R., 1987. Simultaneous determination of total nitrogen and total phosphorus in freshwater samples using
persulfate digestion. Internat. J. Environ. Stud. 27, 267-275.Liaw A., Wiener M., 2002. Classification and regression by
randomForest. R News 2, 18–22.
Marsh, W.H., Fingerhut, B., Miller, H., 1965. Automated and manual direct methods for the determination of blood urea.
Clin. Chem. 11, 624–627.
This dataset is filed in the eAtlas enduring data repository at: data\2016-18-NESP-TWQ-2\2.1.7_Engaging-farmers-WQ